- DEPARTMENT_STAFF.QUALIFICATION
Ph.D.
- DEPARTMENT_STAFF.DESIGNATION
Associate Professor
- DEPARTMENT_STAFF.THRUST_AREA
3D printing, Polymer composites, Polymer surfactant interactions, Water conservation
- DEPARTMENT_STAFF.ADDRESS
M.E. Section, University Polytechnic, AMU
- DEPARTMENT_STAFF.MOBILE
- DEPARTMENT_STAFF.EMAIL
anisansari_amu@yahoo.co.in
- DEPARTMENT_STAFF.TIME_TABLE
Dr. Ansari is working as an Associate Professor of Chemical Technology (Polymers) in the Mechanical Engineering Section, University Polytechnic, Faculty of Engineering and Technology at Aligarh Muslim University, Aligarh. Before joining AMU, he worked with Oxford Mouldings Private Limited (Ghaziabad). He did B. Tech. in Chemical Technology (Polymer) from Harcourt Butler Technological Institute (HBTI, Kanpur) and post-graduation in Petrochemical Engineering from Zakir Husain College of Engineering and Technology (ZHCET), AMU, Aligarh.
He has published several research papers in reputed journals including Elsevier, Springer, Tailor and Francis, etc. He has also published two book chapters with reputed international publishers. In addition to this, he has published five patents. His patent work on "Water conservation" has been granted recently. Marquis has published his biography in the "Who is Who in the World 2016".
In the year 2004, he introduced a full-time three-year “Plastic Technology” Diploma Engineering course at Mechanical Engineering, University Polytechnic. He developed Polymer Chemistry Lab, Plastic Processing Lab, and Polymer Testing Lab from 2004-2008. More than 60 projects of the final year students have been completed under his guidance.
His areas of interest include polymer composites, 3D printing, polymer surfactant interaction, and water and energy conservation.
A. A. Ansari and M. Kamil, “Analysis of dimensional quality in 3D printed Polylactic acid parts fabricated by fused deposition modeling,” Mater. Today Proc., no. xxxx, 2021. [DOI: https://doi.org/10.1016/j.matpr.2021.04.219] ISSN: 2214-7853.
A. Ansari and M. Kamil, “Effect of print speed and extrusion temperature on properties of 3D printed PLA using fused deposition modeling process,” Mater. Today Proc., no.45/P6/5462, (2021). [ DOI: https://doi.org/10.1016/j.matpr.2021.02.137] ISSN: 2214-7853.
Anis A. Ansari and M. Kamil, 3D Printed Fiber-Reinforced Polymer Composites by Fused Deposition Modeling Process - An Overview, MSJ Journal, Volume IX, Issue XII, December/2020, ISSN: 2347-3150, pp. 957-970, Impact Factor 4.7
Anis A. Ansari, M. Kamil, and Kabir-ud-Din, Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium, J.Dispersion Science and Technology ,Vol. 34 (5), pp. 722-730, 2013. [Taylor & Francis Group, LLC, ISSN: 0193-2691 print/ 1532-2351 online, DOI: 10.1080/ 01932691.2012.685850], Impact Factor 1.701
Aftab A.A., Ujjwal K.umar, Atif Jamal Siddaque, and Anis Ansari, Experimental Study of the Characteristics of Thermoplastic Polymer Blend, Journal of Material Science and Mechanical Engineering (JMSME), KS Publications, Vol. 2, Number 7; 2015 pp. 1-6. ISSN: 2393-9095 (Print); ISSN: 2393-9109 (Online).
Anis A. Ansari, M. Kamil, and Kabir-ud-Din, Interaction of Oppositely Charged Polymer–Surfactant System Based on Surface Tension Measurements, J. Petroleum Science Research, Vol. 2 (1), pp. 35-40, 2013. ISSN: 2168-5533 (online), Indexed (sindexs.org).
S. Ali, and Anis A. Ansari, Design of Pedal Operated Machine for Injection Moulding, AMAE Int. J. Manufacturing and Material Science, Vol. 01 (01), pp. 47-49, 2011. [AMAE DOI: 01.IJMMS.01.01.542], ISSN: 2162-0040 (print), 2162-0059 (online).
PATENTS
Anis A. Ansari, “A System for Water and Energy Conservation in a Reverse Osmosis based Water Purifier”, Patent Application No. 20191000109, Filed on Jan. 02, 2019, Published in the Official Journal of the Patent Office, Issue No. 27/2020, p.25185, July 03, 2020.
Anis A. Ansari, “A Controlled water dispenser system for Water Conservation”, Patent Application No. 201711002792, Official Journal of the Patent Office, Issue No. 30/2018, p.28269, July 27, 2018.
Anis A. Ansari, “A Sound-Frequency based Automatic Valve System (S-FAV) for Water Conservation”, Patent Application No. 201611029033, Official Journal of the Patent Office, Issue No. 40/2016, p.69233, Sept. 23, 2016.
Anis A. Ansari, and Aftab A. A., “A Simple Tap-attachment for Water Conservation”, Patent Application No. 201611005973, Official Journal of the Patent Office, Issue No. 11/2016, p.10202, Mar. 11, 2016.
Anis A. Ansari, “A Novel Automatic Tap System for Water Conservation” Patent Application No. 201611003434, Official Journal of the Patent Office, Issue No. 8/2016, p.8066, Feb. 19, 2016.
BOOK CHAPTER
Anis A. Ansari “Oil Spill on Sea Water” Advances in Petroleum Engineering- Refining Vol.1, pp. 308-325. Chemical Technology Series, ISBN Series:1-62699-042-5, ISBN Volume:1-62699-045-X, Studium Press LLC, Houston, TX-77072, USA, 2015.
NEWSLETTER
Anis A. Ansari, Tips to Save Water in Daily Life, WORLD WATER DAY-2018, IEI News, Vol. 68, No. 2, p.6, 2018. [Organized by IE(I) Aligarh local centre, Aligarh, March 22, 2018].
- Anis A. Ansari and M. Kamil, "Analysis of dimensional quality in 3D printed polylactic acid parts fabricated by fused deposition modeling." Materials Today: Proceedings 47 (2021): 2281-2287.https://doi.org/10.1016/j.matpr.2021.04.219
- Anis A. Ansari and M. Kamil “Izod impact and hardness properties of 3D printed lightweight CF-reinforced PLA composites using design of experiment”, International Journal of Lightweight Materials and Manufacture, 2022, ISSN 2588-8404, https://doi.org/10.1
- Anis A. Ansari and M. Kamil. "Effect of print speed and extrusion temperature on properties of 3D printed PLA using fused deposition modeling process." Materials Today: Proceedings 45 (2021): 5462-5468. https://doi.org/10.1016/j.matpr.2021.02.137. https: https://www.sciencedirect.com/science/article/pii/S2214785321011998Materials Today: Proceedings 45 (2021): 5462-5468.
- Anis A. Ansari and M. Kamil “Performance study of continuous fiber-reinforced 3D printed polymer composites”, J. of Materi Eng and Perform, Springer (2022), pp 1-15. https://doi.org/10.1007/s11665-022-07715-2
- Anis A. Ansari, M. Kamil, and Kabir-ud-Din, Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium, J.Dispersion Science and Technology ,Vol. 34 (5), pp. 722-730, 2013.
- Anis A. Ansari and M. Kamil, 3D Printed Fiber-Reinforced Polymer Composites by Fused Deposition Modeling Process - An Overview, MSJ Journal, Volume IX, Issue XII, DECEMBER/2020, ISSN NO : 2347-3150, pp. 957-970, Impact Factor 4.7